Most standard drain assemblies without overflows will work with our metal sinks.We also include a collar that may be needed to ensure a watertight seal at the drain.The collar is simply placed between the sink & the rubber gasket on the tailpiece (see diagram).
Required drain use RD-01-AC Drain or RD-01-ORB Drain. Standard drains are 1.25”.
Do not use pop-up drains
Fasten drain to vessel per drain instructions. DAP Qwik Seal or Henkels PolySeam Seal can be used between the drain bevel and drain. Do not use plumbers putty.
3” hole in counter material is needed.
Secure the vessel to the countertop using a bead of silicon or construction adhesive.
